Anypos600
Point of Service
CHAPTER 3
DRIVER INSTALLATION
About Installation
The driver utilities and software are installed by following methods:
1.
Install from the CD drive.
2.
Install from the USB CDROM, USB-HDD/ ZIP/FDD or Flash disk.
3.
Install from internet.
NOTE
:
If the system boots from the USB device, configure the BIOS Setup Utility
first. (See the BIOS SETUP UTILITY on Chapter 2)
Software Description
HDD or CD contains driver utilities and software after manufactured.
The directory are as below:
DRIVERS
:
CHIPSET // Enhances the chipset.
VGA // Enhances the graphic chip.
AUDIO // Enhances the audio chip.
LAN // Enhances LAN chip.
USB // USB2.0 driver
TOUCHSCREEN // Enhances Touchscreen chip
MODEM // Enhances Modem chip
NOTE
:
DRIVERS’ directories are configured according to the type of the Anypos.
Please select your Anypos a directory depending on the type of Anypos.
TOOLS:
CHECK Self Test Program
DLL Device Link Library (DLL) for device
KEYBOARD Keyboard Programming Software
MANUAL Manual and peripheral instruction
DOSNET Client software to Access Server for DOS.
All above can be downloaded from our website (www.aopos.com)
Driver Installation
Please install the driver utilities as the following sequences, otherwise it may result in
unpredictable circumstances, such as: unstable system, display mistake, etc, and even you may
14