Anypos600
Point of Service
Powering the Anypos on and off
1. Remove the bottom cover.
Connect the power cable to the
power connector
on the Anypos , Connect the AC
adapter to an electrical outlet.(only
for External Adapter)
3. Press the power button on the
underside of the display panel. The
power LED turns on.
To turn off the Anypos, shut down
the operating system: the main
power turns off automatically.
4. There are 2 ways to turn off the Anypos:
Click “Start” button, and then “Turn Off Computer”, “Close”;
Use the main power button to turn off the power, for example if the operating system
you are using does not support power down by the OS or if the system crashes or
hangs.
Recommended turning off: 1)
9
