AOpen AP5VM, Руководство пользователя

Страница: 88 / 89

Frequently Asked Questions
B-8
A: The Deturbo mode was originally designed to slow down CPU speed for old
applications (especially old games). It uses programming loop to wait or
delay special event. This programming method is considered very bad since
the delay of loop highly depends on the CPU speed and the application fails
at high-speed CPU. Almost all new applications (including games) use RTC
or interrupt to wait event. There is no need for Deturbo mode now. The
Turbo switch is now used as Suspend switch. However, some MBs still
support Turbo/Deturbo function via keyboard. You can set the system to
Deturbo by pressing <Ctrl> <Alt> <->. To back to Turbo mode, press <Ctrl>
<Alt> <+>. Note that the Deturbo mode has been removed in new MBs since
these require more code space in Flash ROM.
Q: Power Management Icon does not appear in the Windows 95 Control Panel
even though the APM under BIOS Setup is enabled.
A: This problem occurs if you did not enable the APM function before you install
Windows 95. If you have already installed Windows 95, re-install it after the
BIOS APM function is enabled.
Q: Why does the system fail to go into suspend mode under Win95?
A: This problem may be caused by your CDRO M settings. The CDROM Auto
Insert Notification of Win95 is dafault enabled, the system will continue to
monitor your CDROM, auto-execute application when a CD diskette is
loaded, and prevents the system from entering into suspend mode. To
resolve this, go into Control Panel
System Device Manager
CDROM Setting, and disable the "Auto Insert Notification" function.
Q: What is Windows 95 Registry?
A: The functions of Windows 95 Registry and the Windows 3.1 INI files are
almost the same. Both store the hardware and software configurations. The
only difference is that Registry is a database while INI is text file. You can
run REGEDIT.EXE to further understand the Registry structure. Checking
and studying the structure of this file will help you solve some configuration
problems.
Q: How to solve the error message "System Resource Conflict" on the
BIOS POST screen?
A: This error message appears when PnP BIOS detects a resource conflict
while initializing the system resource during POST. You may try to force the
PnP BIOS to reconfigure the resource by pressing <Ins> during POST.
Q: Which version of the Windows '95 that I am using?