AOpen AP55CS Скачать руководство пользователя страница 90

Страница: 90 / 92

AMI BIOS

User’s Guide

4-43

NCR SCSI BIOS and Drivers

The NCR 53C810 SCSI BIOS resides on the same flash memory

chip as the system BIOS. To use the onboard NCR BIOS, you need

to install an NCR 53C810 SCSI controller card in your system.

All SCSI devices that you install in your system require software

drivers. The NCR SCSI BIOS directly supports SCSI hard disks

under DOS, Windows and OS/2. It also uses DOS-format and SCO

UNIX-format support floppy disk device drivers that come with the

NCR 53C810 SCSI controller card. The DOS-format device drivers

are for SCSI devices used with DOS, Windows NT, Novell NetWare

and OS/2. The SCO UNIX-format device drivers are for SCSI

devices used with SCO UNIX. These drivers offer higher

performance than the direct BIOS support.

To use the device drivers, you must install them in your system hard

disk drive and add them to your system configuration files. For

detailed installation instructions, see the README files that come

with the drivers.

The system board also supports the AMI
Flash Memory Writer Utility that allows
you to upgrade the system BIOS. For
more information on this utility, contact
your local distributor.

Содержание AP55CS





























































































Результаты поиска

Содержание AP55CS

Отзывы:

Бренды по названию

Популярные бренды

AOpen AP55CS, Руководство пользователя

Результаты поиска

Содержание AP55CS

Отзывы:

Бренды по названию

Популярные бренды