AOpen AP55CS Скачать руководство пользователя страница 18

Страница: 18 / 92

Features

1-6

User’s Guide

Super I/O Controller

The onboard super I/O controller chip supports two UART

16450/16550-compatible serial ports and a parallel port (SPP, EPP,

ECP)

, with a maximum data throughput rate of 1.2 MB/sec. It also

accommodates 1.2-/1.44-/2.88-MB disk drives allowing full-range

access to 5.25-inch drives with 360 KB or 1.2 MB format and 3.5-inch

drives with 720-KB, 1.44-MB or 2.88-MB format.

VGA Controller

The AP55CS board has a built-in SiS6205 VGA chip. This chip

functions both as a graphics and a video accelerator. See Chapter 3

for more details on the VGA feature.

Two-channel PCI Mode 4 Enhanced-IDE Interface

The board utilizes the enhanced integrated drive electronics (IDE)

interface that improves the data transfer rate. It also allows the

system to support four IDE devices, such as hard disk with more than

528 MB capacity, CD-ROM, and Tape drives. This feature enables

the users to increase the data storage.

Keyboard Connector

The keyboard connector at the rear of the system board accepts any

AT-compatible keyboard.

SPP: Standard Parallel Port
EPP: Enhanced Parallel Port (IEEE 1284 compliant)
ECP: Extended Capabilities Port (IEEE 1284 compliant)

Содержание AP55CS





























































































Результаты поиска

Содержание AP55CS

Отзывы:

Бренды по названию

Популярные бренды

AOpen AP55CS, Руководство пользователя

Результаты поиска

Содержание AP55CS

Отзывы:

Бренды по названию

Популярные бренды