manualshive.com logo in svg

AOpen AP55CS, Руководство пользователя

Поделиться
Скачать
AOpen AP55CS Скачать руководство пользователя страница 78

AMI BIOS

                                                                                                                                                 

User’s Guide

4-31

Monitor I/O Port

Set this option to 

Monitor

 if you want to check the I/O port

activities.  Any I/O port activity detected resumes the system to

normal mode.  Select 

Ignore

 to bypass the function during power-

saving mode.

Size -- Number of Ports

This parameter is configurable only if the Monitor I/O Port is set to

Monitor

.  This allows you to set the I/O address range to monitor.

The options are 1, 2, 4, 8, 16, 32, 64, 128, and Disabled.

Base -- First Port (in Hex)

Similar to the Size -- Number of Ports option, this parameter is

configurable only if the Monitor I/O Port is set to 

Monitor.

  This

parameter lets you set the base address of the I/O address range that

you want to monitor.  To set, simply click the + and - icons until you

find the desired address.

To determine the I/O address supported
by the I/O card, refer to the card manual.

Содержание AP55CS





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды