Clean the filter screen
When the water pressure is too low to operate the toilet normally, please clean
the filter screen by following steps.
STEP l I Close the supply stop.
STEP 3 I Clean the filter screen.
STEP 2 I Remove the filter screen.
Detach the Electric Bidet Seat from the mounting plate.
Place the Electric Bidet Seat vertically.
Remove the filter screen by a screwdriver.
Note: Do not use any detergent. Clean with fresh water only.
Do not squeeze the filter screen during cleaning to avoid
deformation of the filter screen.
STEP 4 I Reinstall the filter screen and turn on the supply stop.
Reinstall the filter screen in the order of which it was removed.
Note: After turning on the supply stop, check for leakage of all connections.
&_
WARNING
• ANZZI is not responsible for any damage caused by the use of detergents containing
chlorine (calcium hypochlorite).
• Always unplug before cleaning.
&_
ATTENTION
• Always TEST your detergent in an inconspicuous area before applying it to the entire
product surface.
• Wipe and rinse the surface with water immediately after applying detergent. Rinse and
dry the excessive spraying on surfaces.
• Do not soak the surface with detergent.
PG.14
Use a soft, wet sponge or cloth. Do not clean the surface with abrasive materials, such as
brushes or scouring pads.
Содержание ENVO TL-AZEB101B
