2
INSTALLATION INSTRUCTIONS
Apply to the below style of LED Backlit Mirror
Please read carefully and save these instructions.
Don’t discard any of the packaging until you are sure that you have all of the parts and the fittings.
Make sure power to the junction box is off before commencing installation.
IMPORTANT
Unpack mirror. DO NOT lay mirror on tiled or concrete surface prior to installation.
Mirror must be on protected surface to prevent chipping of the corners.
Care must be taken before drilling pilot holes to avoid any existing wiring or pipe work that may
be concealed.
A certified electrician must perform all work. The mirror must be connected to a GFI.
The anti-fog mat operates only when the LED light is turn on by the touch sensor.
INSTALLATION
Please refer the installation diagram on the back of thepage.
1)
Unpack
the
LED
mirror
and
prepare
tools
needed.(
See
Pic.1
)
2)
Make
sure
the
measurement
on
the
carboard
screw
holes
are
matching
up
with
aluminum
base
on
the
mirror
back,
then
mark
the
screw
holes
according
from
the
carboard
with
pencil.(See
Pic.2)
3)
Drill
holes,
and
put
in
the
plastic
plugs,
then
fix
the
aluminum
bar
by
screws
and
twisting
the
T
shape
nail
to
the
wall.(See
Pic.3&Pic.4);
4) Connect hardwires of mirror light and blue tooth speaker to power lines on the wall. Make sure the
power off.(See Pic.5
)
;
5)
Hanging
the
LED
mirror
with
aluminum
bar
and
lock
it
with
the
anti-pull
iron
sheet
by
using
the
spanner
provided
at
the
fittings
bag.(See
Pic.5&Pic.6)
FUNCTION DESCRIPTION
1) Blue tooth speaker: Turn on main power, the blue tooth speaker will be in standby; turn on the
phone's blue tooth to pair-AST9K07, then you can control the mirror blue tooth speaker and play
music.
2) Touch sensor switch: Turn the light and anti-fog function by the dimmable sensor switch, see
details as below:
Button:
a
)
Touch
the
button
for
LED
light
and
anti-fog
control;
b)
Long
press
button
for
dimming.
It
will
change
the
LED
brightness
from
10%-100%.
MAINTENANCE
Wipe
clean
with
a
soft
damp
cloth.
Apply
glass
cleaner
to
cloth
and
do
not
apply
directly
to
mirror.
Never
use
abrasive
cleaners
as
these
could
damage
the
finish
or
exposed
LED
strips.
