Anztec Change QC-7610P, Инструкция по эксплуатации

Страница: 35 / 36

QC-7610P Rev 1.0 Page 35
Mounting Guide
To install the unit:

Remove the angle clamping brackets from the cabinet.

Push unit through the aperture from the outside until the front panel is hard against the wall.

Re-bolt the clamping brackets loosely to the cabinet.

Push the clamping brackets up against the wall and tighten the bolts on the cabinet to lock it
into place.

The forward facing bolts on the clamping brackets can be adjusted for extra tension.

Plug power cord into power supply, switch on and the unit is installed.
Wall thickness 100mm – 200mm
Front Panel Rear door
Clamping Bracket
Locking Bolts