Transmission Required Time
10-2
10.2 Maximum transmission delay time
The transmission delay time from the input to the output is as shown in the following illustration.
No
Content
Time required
[1] [9]
Input/output equipment
response time
Check the specifications of the input/output equipment you
use.
[2] [8]
AnyWireASLINK slave
unit response time
(Processing time)
The specifications differ by slave unit.
* For more information, refer to the manual of each slave unit.
[3] [7] Transmission cycle time
A delay time of the transmission cycle time multiplied by one
to two will occur.
The transmission cycle time differs depending on how the
number of transmission I/O points is set up.
For more information, refer to 2.2 Performance specifications.
[4] [6]
Processing time required
by this device
0.6 [ms]
[5]
Controller processing
time
Controller’s processing time (PROFINET communication time,
program scan time, etc.)
Input equipment response time
Input slave response time
(Processing time)
Input
Output
Output equipment response time
Output slave response time
(Processing time)
Processing time required by
this device
Processing time required by
this device
Maximum transmission delay time
Maximum transmission delay time
PROFINET
system
AnyWireASLINK
system
Input/output
equipment
[3] Transmission cycle time
[7] Transmission cycle time
[5] PROFINET
system
processing time
[2]
[4]
[6]
[8]
[9]
[1]
