Anywire B2G78-PN1, Руководство пользователя

Страница: 32 / 58

I/O data
5-6
5.1.6. Slave unit designation (output)
Module name ASLINK slave unit designation
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
ID and Param
Num (1)-(16) R Q Designated ID (1)
Designated parameter number (1)
R Q Designated ID (2)
Designated parameter number (2)


R Q Designated ID (16)
Designated parameter number (16)
ID and Param
Num (17)-(32) R Q Designated ID (17)
Designated parameter number (17)
R Q Designated ID (18)
Designated parameter number (18)


R Q Designated ID (32)
Designated parameter number (32)
ID and Param
Num (33)-(48) R Q Designated ID (33)
Designated parameter number (33)
R Q Designated ID (34)
Designated parameter number (34)


R Q Designated ID (48)
Designated parameter number (48)
ID and Param
Num (49)-(64) R Q Designated ID (49)
Designated parameter number (49)
R Q Designated ID (50)
Designated parameter number (50)


R Q Designated ID (64)
Designated parameter number (64)
Name Content
Q Parameter update start command Switching this bit from OFF to ON starts updating the value
of designated parameter.
R Update confirmation flag A flag for confirming the update
Confirmation of the latest value is possible by writing an
inverted value of the update confirmation flag return signal
(L).
Designated ID (1)
–(64):
ID number of slave unit subject to status details (1)
–(64)/parameter (1)–(64) value setting
Designated parameter number (1)
–(64):
Parameter number subject to parameter (1)
–(64) value setting
0: Sensing level
1 or more: Parameter No.