Bitek Technology
ANYTRON ANYCUT1 User Manual
© 2016 Bitek Technology. All rights reserved.
User Document
Rev 1.0.0 – 2016.03.06
62 of 120
-
After checking the cutting position, you can slit the media by using duty and feeder speed
you want with [▶] button.
<Slitting>
3.2.3
Auto Vision SW for Vision
In Anycut, it is using the vision system to correct the printed margin and the user needs to do some
special setting in Auto Vision program.
3.2.3.1
How to register the vision mark in the vision camera
Before running S/W, make the vision mark be under the camera by pressing F1 and F button on the panel
and check that the vision camera is located in the right position.
※ Please refer to this manual 3.1.3 ‘How to Set Vision Camera’