Bitek Technology
ANYTRON ANYCUT1 User Manual
© 2016 Bitek Technology. All rights reserved.
User Document
Rev 1.0.0 – 2016.03.06
54 of 120
<Illustrator 에서 라벨 상하 간격(Gap) 설정하기>
PART Ⅲ
① Vision On/Off: To select the Vision On/Off. (How to use Vision: please refer to 3.2.3 Auto
Vision S/W for Vision)
※ Precaution: The vision is only for Stop and Go
PART Ⅳ
① Field Size: It is a max width size to cut in Anycut and use 210mm as a default value
whenever you cut or it is disabled to prevent that a user changes it.
② Sensor Pos: It is a distance from the origin to the sensor and it is called 'origin setting'.
Generally, user uses a default value for this, but if it cuts when the origin (sensor position) is
incorrect, it needs to set it again. (you can refer to this manual 7.3 When Origin is incorrect)
③ Split Size: the maximum cutting size that can be cut at once is 210(W)x 210(L)mm.
However, if you enter the split size to cut at once in Split Size menu, it can be cut without any
limitation for the length. For example, when user try to cut the image length 300mm, when
you enter 100 mm in Split Size, Anycut will cut it 3 times as each 100mm.
※ Precaution: when using Split Size function, there are maximum size depends on cutting
mode as below.
