Bitek Technology
ANYTRON ANYCUT1 User Manual
© 2016 Bitek Technology. All rights reserved.
User Document
Rev 1.0.0 – 2016.03.06
35 of 120
<Example 5>
-
When Laser On Delay is too long (Example 6)
If Laser On Delay is too long, despite the reflector already moved as it needs, the laser does not
be started. It means that the laser starts to work late than normal, it can cause the problem as
below.
<Example 6>
⑤ Laser Off Delay
-
When Laser OFF Delay is too short (Example 7)
If Laser OFF Delay is too short, despite the reflector does not be reached the endpoint for
cutting, the laser finishes to work. it means that the laser is finished faster than a time to be
finished actually, it can cause the problem as below.
