32
CTCSS/DCS Encode / Decode Synchronous Setup
FUNCTION MENU SETUP
Note: User-defined CTCSS encode and decode must be setup by programming software.
This function is for adjusting CTCSS/DCS encode/decode as a synchronous set up
(simultaneous changes Menu NO 01 and 02)
Press
1.
key, the top left corner of the LCD will display " " icon, then press
key to enter into function menu.
Press
2.
/
key to choose NO. 03 function item, it shows
"RT-CDC"
on LCD.
Press
3.
key to choose CTCSS, DCS or OFF, when DCS signaling is
selected, press
key to choose a DCS positive or inverse code.
Press
4
.
key to enter next menu, press
/
key to choose desired
CTCSS/ DCS code.
CTCSS:
62.5Hz~254.1Hz, 51 groups in total, and 1 group user-defined code.
DCS:
000N-777I, 1024 groups in total. "N" stands for positive code, "I" stands for
inverse code.
Press
5.
or
key to confirm and exit.
