27
Channel Scan Skip
Under channel mode, press
key, the top left corner of LCD displays "
" icon, then press
key
to set the current selected channel as Channel scan skip.Repeat above operation to cancel channel scan
skip.
BASIC OPERATIONS
Frequency Reverse
When in standby, press
key, the top left corner of the LCD will display "
"
icon, then press
key to set the selected channel frequency reverse, repeat
above operation to turn off frequency reverse.
When LCD displays "
1.
R
" icon, it means current selected channel has the
frequency reverse function enabled, the TX frequency and RX frequency are reversed, if CTCSS/DCS
signaling is set, they will also interchange.
If no "
2.
R
" icon disappears, it means that the channel is normal and is not reversed.
LCD displayed
1.
"
S
" means the current channel will not be scanned.
"
2.
S
" icon disappeared means the current channel will be scanned.
When in standby, press
key, the top left corner of the LCD will display "
"
icon, then press
key to choose High or Low power for the current selected
channel.
TX Power selection
