3
The transceiver is a high performance amateur and professional radio with dual band, dual standby, dual
display and other advanced features. According to your specific application, you can set the radio to operate
as an Amateur Transceiver or as a Professional (Commercial) Transceiver. There are 3 operating modes - and
you can pick the mode best suited for your needs at anytime.
(
Pic 1
)
(
Pic 2
)
(
Pic 3
)
(
Pic 4
)
Modes of Operation
11
By programming software:
A.
In the PC software's "General Setting (Function
Setup)" menu, choose the "Display Mode" drop down menu.Frequency and
Name modes will display the channels by frequency or name accordingly
and still allow amateur usage and access. Channel mode will restrict
access to amateur options (such as VFO).
By manual setup:
B.
Please refer to "Display Mode" in Page 56.
Fre Channel mode:
A.
When you set the operating mode as
"FREQ", it enters into FrChannel mode. This mode allows editing
settings of channels and the shortcut operation can also be used. Once the
radio is turned off or switched to another channel, the temporary settings
will be erased and changed back to the initial settings.(As pic 1)
Name Tag + Channel Mode:
B.
When you set the operating mode as
Amateur Transceiver Mode:
21
Unless your setting is Channel mode,
Frequency and Name are considered as Amateur transceiver modes. Under
these modes, you can press the "
" key to switch between Channel mode
and VFO.
USER MODE SETUP:AMATEUR OR COMMERCIAL RADIO
