AnyTone AT-588UV, Руководство пользователя

Страница: 33 / 43

27
7
General Setting
Set the left band and right band as VHF (136~174MHz) and
UHF(400~470MHz)then turn of this function will enable Cross Band
repeater function.
Press
11
key to enter function menu.
Switch the selector knob to choose No 44 21
function. The LCD displays " X-RPT "
Press the Main band selector knob, the
31
LCD displays " XSTART ".
Press the Main band selector knob, the radio prompt "DU-DU", the 41
Mix Band repeater function is on.
Press
11
key to enter function menu.
Turn the Main band selector knob to choose No. 45-47 menu. The 21
LCD displays " COL REd "," COL GRN "," COL BLU "
Press the Main band selector knob to 31
enter function setup.
Switch the Main band selector knob to
41
choose wanted value.Each color (Red,
blue, Green) with 32 brightness levels.
Press the Main band selector knob or
51
cRoSS bAnd RepeAt
lcd bAckliGht
NARROW : Narrow band (12.5KHz)
Press the Main band selector knob or 51
key to store value and back to
function menu. Press key or hold
selector knob for over 0.5 second to store setup and exit.
key to store value and back to
function menu. Press key or hold
selector knob for over 0.5 second to store setup and exit.
Press
11
key to enter function menu.
Turn the Main band selector knob to 21
choose No. 48 menu. The LCD displays " dIMMER "
Press the Main band selector knob to enter function setup. 31
Switch the Main band selector knob to choose wanted value. 41
Available value: 32 brightness levels.
Press the Main band selector knob or
51
key to store value and back to function menu. Press key
or hold selector knob for over 0.5 second to store setup and exit.
keYpAd bAckliGht bRiGhtneSS
The transceiver offers enquiry of calling record.
Press
11
key to enter function menu.
Turn the Main band selector knob to 21
choose No. 49 menu. The LCD displays " NOTE "
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
This transceiver able to record 16 calling at most.
Press the Main band selector knob or
51
key to store value and back to function
menu. Press
key or hold selector
knob for over 0.5 second to store setup and exit.
cAllinG RecoRd