24
7
General Setting
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No33 menu. The LCD displays "
RPT MOd
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted Offset direction.
41
-
:
Minus offset, means transmitting frequency lower than receiving
frequency.
+
:
Plus offset, means transmitting
frequency higher than receiving frequency.
OFF:
OFFSET is turn off. Transmitting frequency is same as receiving
frequency.
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No34 menu. The LCD displays "
SCAN
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
TIME:
it pauses 5s once scanning a matching signal, then resume scan.
BUSY:
it pauses once scanning a
matching signal, then resume scan after
the signal disappeared for 2 seconds.
SECEdE:
It Stops once scanning a matching signal, and exit scan.
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No35 menu. The LCD displays "
SCAN M
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
MEN:
Channel Scan, the transceiver will scan all the channel after
enter channel scan.
MSN:
Priority Channel Scan, the
transceiver will only scan the priority channel after enter channel
scan.
Press the Main band selector knob or
51
key to store value and
back to function menu. Press
key or hold selector knob for over
0.5 second to store setup and exit.
RF Squelch leVel Setup
oFFSet diRection Setup
ScAn dwell tiMe Setup
pRioRitY chAnnel ScAn
When squelch level function is on, you can cancel squelch only when
the signal strength reach the level setup by users.
Press
11
key to enter function menu.
Turn the Main band selector knob to
21
choose No32 menu. The LCD displays
"
RF SQL
"
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
S-2:
Able to hear the calling when the power meter reach 1 bar.
S-5:
Able to hear the calling when the power meter reach 4 bar.
S-9:
Able to hear the calling when the power meter reach 8 bar.
S-FULL:
Able to hear the calling when the power meter reach full bar.
Press the Main band selector knob or
51
key to store value and back to
function menu. Press
key or hold
selector knob for over 0.5 second to store setup and exit.
Содержание AT-588UV
Страница 1: ...Dual Band FM Transceiver USER S MANUAL...
Страница 2: ......
Страница 43: ...A1 0 12 09...
