AnyTone AT-588UV, Руководство пользователя

Страница: 32 / 43

26
7
General Setting
Press
11
key to enter function menu.
Switch the selector knob to choose No40 21
function. The LCD displays " 5TONE Id "
Press the Main band selector knob to
31
enter function setup. The LCD will show the DTMF self ID.
Press the Main band selector knob or
41
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
The time-out timer limits the amount of continuous transmitting time.
When the transmitting reaches the time limit which has been
programmed, the transmission will be cut off and emit warning beep.
Press
11
key to enter function menu.
Turn the Main band selector knob to 21
choose No41 menu. The LCD displays " TOT "
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
1-30 MIN , total 30 levels,
OFF : TOT is turn off.
Enable this function, the adjustment any band of VFO frequency,
will bring same frequency change to both bands. Adjust one gear, the
frequency for both band will increase or decrease one step size value.
Press
11
key to enter function menu.
Turn the Main band selector knob to 21
choose No42 menu. The LCD displays " VFOTR "
Press the Main band selector knob to enter function setup. 31
Switch the Main band selector knob to choose wanted value. 41
Available Values: ON , OFF .
Press the Main band selector knob or 51
key to store value and back to function menu. Press key
or hold selector knob for over 0.5 second to store setup and exit.
Press
11
key to enter function menu.
Turn the Main band selector knob to 21
choose No43 menu. The LCD displays " WINNAR "
Press the Main band selector knob to enter function setup.
31
Switch the Main band selector knob to choose wanted value.
41
WIdE : Wide band (25KHz)
MIddLE : Middle band (20KHz)
5tone SelF id enquiR
tot (tiMe-out tiMeR)
VFo FRequencY linkAGe
wide/nARRow bAnd
function. The LCD displays " dTMF Id "
Press the Main band selector knob to
31
enter function setup. The LCD will show the DTMF self ID.
Press the Main band selector knob or
41
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
Press the Main band selector knob or
51
key to store value and
back to function menu. Press key or hold selector knob for over
0.5 second to store setup and exit.
This function only valid when both bands work on VFO mode.
NOTE