AnyTone ANILE-8R, Руководство пользователя

Страница: 31 / 42

Professional
FM Transceiver
23
ADVANCED OPERATIONS
Priority Scan Setup
There are two priority-channel settings that you can set the transceiver to have: "fixed" or "selected".
A “fixed” priority channel is one main channel selected by software. A “selected” priority channel is the
current channel selected by the channel knob.
If a transmission is received on a channel and the radio stops to listen to the transmission it will ‘look
back’ to the priority channel set (priority or selected) on the time limit selected by software
Look Back Time A(s): This is the time you set before checking back on the priority channel if the
priority channel just received a transmission (with matching signaling and carrier).
Look Back Time B(s): This is the time you set before checking back on the priority channel if the
priority channel has not received a transmission since the last scanning pass (no matching signal).
Push-to-Talk Operation During Scan:
During Scan you can select how the Push-to-Talk Button Functions, in the software there are four
options:
Selected: The Push-to-Talk Button will default to the channel knob selected channel (to communicate
on a different channel you select the channel by knob)
Scanning Resume Options (RX/TX):
Time to Resume Scanning After RX (Dropout Delay Time): The interval between the time that
receiving a transmission is finished before the transceiver automatically resumes scanning.
Time to Resume Scanning After TX (TX Dwell Time): The interval between the time that
transmitting a transmission is finished before the transceiver automatically resumes scanning.