AnyTone ANILE-8R, Руководство пользователя

Страница: 24 / 42

Professional
FM Transceiver
16
Squelch Off
Press the programmed key of 'Squelch off' [PF1]/[PF2], which will bypass the squelch. You will hear
any noise on the frequency. By pressing this key again, the squelch level will be enabled again. By
using this function you could monitor a weaker signal that might be too hard to normally be received (or
break through the squelch).
ADVANCED OPERATIONS
Monitor
Press the programmed key of ‘Monitor’ [PF1]/[PF2], the transceiver will respond with a beep that
confirms you have enabled the ‘monitor’ function. When activated, your transceiver will ignore the
pre-programmed CTCSS/DCS decode requirements and will monitor all the frequency activity as long
as it has matched the carrier wave (frequency). Press the programmed key again and the transceiver
will respond with a beep that confirms you have disabled the ‘monitor’ function.
Current Channel Power Enquiry
Press the programmed key of ‘Current Channel Power Enquiry’ [PF1]/[PF2], the transceiver will
announce the current channel transmitting power level (either High or Low).
Scan
Press the programmed key of ‘Scan’ [PF1]/[PF2], the transceiver will respond with a beep that
confirms you have enabled the ‘scan’ function. It scans channels in your scan list one by one, and
the Green light flashes once per second. When a channel receives a signal, the green light will
stay lit and the transceiver temporarily stays on the channel until the signal disappears. Press the