AnyTone ANILE-8R, Руководство пользователя

Страница: 30 / 42

Professional
FM Transceiver
22
Time-out Timer
The purpose of Time-out-Timer is to restrict the transceiver from accidental long-term transmissions.
If the transmission time goes beyond the preset time limit, the transceiver will stop transmitting and
warn the user and make a beep sound.
Users can set TOT timer by programming software.
Time-Out Timer Pre-Alarm
The Time-Out Timer Pre-Alarm is to warn users that they are about to time-out (as described above).
Users can program their desired TOT Pre-Alarm time by programming software.
ADVANCED OPERATIONS
Voice Prompt
Voice prompts identify the radio input operation, inform the user of operator error, or a fault condition.
You can set the voice to be Chinese or English. Users can program their desired voice prompts by
programming software.
Battery Save Setup
You can set a battery save ratio according to your requirements. The standby time can be extended
if you enable the battery save function, but if you set the ratio setting too high, it may cause you to
miss the beginning of a transmission. When the transceiver receives a matching signal or starts an
operation it will automatically exit this function.
There are three modes you can enable by software:
1:4 The standby time between the normal working state and battery saving mode is 1:4
1:8 The standby time between the normal working state and battery saving mode is 1:8
1:16 The standby time between the normal working state and battery saving mode is 1:16