AnyTone ANILE-8R, Руководство пользователя

Страница: 25 / 42

Professional
FM Transceiver
17
ADVANCED OPERATIONS
Frequency Reverse
Press the programmed key of ‘Frequency Reverse’ [PF1]/[PF2], the transceiver will respond with
a beep that confirms you have enabled the ‘frequency reverse’ function. Once enabled the current
channel RX and TX frequency will swap along with the CTCSS or DCS signal setup. Press the
programmed key again and the transceiver will respond with a beep that confirms you have disabled
the ‘frequency reverse’ function.
Talk Around
Press the programmed key of ‘Talk Around’ [PF1]/[PF2], the transceiver will respond with a beep that
confirms you have enabled the ‘Talk Around’ function. Once enabled the current channel will transmit
on the same RX frequency, if the CTCSS/DCS signaling is set, it will set the encoding to be the same
as the CTCSS/DCS decoding. Press the programmed key again and the transceiver will respond with
a beep that confirms you have disabled the ‘Talk Around’ function.
Battery Capacity Enquiry
Press the programmed key of ‘Battery Capacity Enquiry’ [PF1]/[PF2], the transceiver will announce
the current battery capacity. There are 10 power levels with “10” meaning that the battery capacity is
NOTE: When ‘talk around’ is enabled, the transceiver will not communicate with other transceivers
through a repeater - it now only communicates from handset to handset.
programmed key again and the transceiver will respond with a beep that confirms you have disabled
the ‘scan’ function and will return to the previous channel before scanning was activated. Please refer
to the other scanning options in the 'advanced operations' to understand additional ‘scan’ options.