Anybus HMSI-27-201, Руководство по установке, Страница: 8 / 12

Example 1: Ethernet Bridge 8 (12)
4 Example 1: Ethernet Bridge
This example describes two Wireless Bridges using UDP tunneling over an ad-
hoc network to connect two Ethernet network segments.
1. Reset both Wireless Bridges to the factory default settings using SMART
configuration mode 2 (LED B).
2. On the first Wireless Bridge, activate SMART mode 4 (LED C).
The LED will blink while the unit is waiting for a connection.
3. On the second Wireless Bridge, activate SMART mode 5 (LED A+C).
The LEDs will blink until the units have connected.
4. When the Wireless Bridges have connected successfully the ))) LED on both
units will show a steady blue light. The first unit will have IP address
192.168.0.98 and the second 192.168.0.99.
Anybus ® Wireless Bridge Installation Guide HMSI-27-201 SP2107 2.2