Anybus HMSI-27-201, Руководство по установке, Страница: 7 / 12

Configuration 7 (12)
SMART Configuration Modes
MODE WLAN Type
Operation Description
LED
A B C D
1 — — Enable DHCP server
2 — — Reset to factory
defaults
3 — — Reset IP settings
4 Ad-hoc UDP Tunnel Wait for auto
configuration
5 Ad-hoc UDP Tunnel Initiate auto
configuration
6 Ad-hoc UDP Tunnel Wait for auto
configuration
(PROFINET priority)
7 Ad-hoc UDP Tunnel Initiate auto
configuration
(PROFINET priority)
8 Infrastructure UDP Tunnel Wait for auto
configuration
9 Infrastructure UDP Tunnel Initiate auto
configuration
10 Infrastructure UDP Tunnel Initiate auto configura-
tion (wired)
11 Ad-hoc Single Client Wait for MAC address
12 Ad-hoc Multiclient Initiate auto
configuration
Enable DHCP Server Activates a built-in DHCP server, which makes it possible to
access the Wireless Bridge without manually configuring
the IP address of the connecting computer. The computer
must be set up for DHCP and be connected directly to the
unit, not through a network.
The DHCP server will stay enabled until the unit is restarted.
PROFINET priority PROFINET network traffic will be prioritized.
Advanced Configuration
Advanced configuration can be carried out using the settings in the built-in web
interface and/or by issuing AT commands. For more information, see the
Anybus
Wireless Bridge User Manual available at www.anybus.com/support .
Anybus ® Wireless Bridge Installation Guide HMSI-27-201 SP2107 2.2