anvajo fluidlab R-300 Скачать руководство пользователя страница 24

Страница: 24 / 69

User Manual fluidlab R-300

Edition 202104

Vers.: 1.2

Update:

Updates are only possible if the device is configured in WLAN mode and integrated
within a WLAN with Internet access (see Chapter 5.2.2):

Open the settings menu of the

fluidlab

R-300 by tapping the menu icon

( ) once.

Tap on the menu item “Updates”.

Tap on the “Check for update” button, if this is present. If it is not pre

sent, skip

this step.

Tap on “Install update”.

The updates will now be transmitted to the

fluidlab

R-300. This process may

take several minutes.

The updates will be installed; this process may take several minutes.

The installation is complete once the system has automatically restarted.

Note:

If the

fluidlab

R-300

is connected to a WLAN with Internet access, the system will

regularly and automatically check for any software updates.

The

fluidlab

R-300

notifies you that an update is available with a green dot on the menu icon ( ) and
the update icon ( ).

Note:

If a new software update is available, a message window will appear within the
update menu at the bottom right-hand edge of the screen with the appropriate
text.

5.4

Maintenance

Various

fluidlab

R-300 sensors require regular checks. For detailed information, see

Chapter 6.5.

5.5

Language Settings

The text on the

fluidlab

R-300's graphical user interface can be displayed in various

languages. The following languages are installed and can be selected when the device
is delivered:

•

English (factory default setting)

•

German

•

French

•

Italian

•

Spanish

•

Turkish

Содержание fluidlab R-300






































































Результаты поиска

Содержание fluidlab R-300

Отзывы:

Бренды по названию

Популярные бренды

anvajo fluidlab R-300, Руководство пользователя

Результаты поиска

Содержание fluidlab R-300

Отзывы:

Бренды по названию

Популярные бренды