anvajo fluidlab R-300, Руководство пользователя

Страница: 22 / 69

User Manual fluidlab R-300
Edition 202104
23
Vers.: 1.2
4. The device will now search for available WLAN networks and, when the search
is complete, will list the names (SSID) of the networks it has found on the
display.
5. Tap on the name of the WLAN to which you wish to connect your device.
6. If necessary, enter the password for accessing the WLAN network and confirm
your entry by tapping on the confirmation button (
).
7. Your device has successfully connected to the WLAN if the WLAN icon ( )
on the menu bar shows the signal strength.
Note: Not all WLAN networks allow new devices to be added without prior registration
of the device by the network administrator (e.g. networks with MAC address or port
filtering).
In order to establish connections to the client software, the fluidlab R-
300 requires the use of port 8080. In order to be able to obtain online software
updates for the device (recommended), the fluidlab R-300 requires Internet access
on port 443 (https). Port 9017 is active on the device side for the LIS connection.
In this case, please contact your network administrator in advance.
5.2.3 Hotspot Mode
The following section describes how you can allow your fluidlab R-300 to create its
own WLAN (hotspot). You can then add other WLAN-enabled devices to this WLAN
so that they can communicate with your
fluidlab R-300.
1. Open the settings menu of the fluidlab R-300 by tapping the menu icon
( ).
2. Tap the switch to the right of “Hotspot”. When the switch turns green , hotspot
mode is enabled. (This will disable WLAN mode if it had been previously
enabled.)
3. Tap on the word “Hotspot”.
4. The display will show the data with which your other WLAN-enabled devices,
e.g. PC or laptop, can access the WLAN hotspot generated by the
fluidlab R-
300:
Network name:
fluidlab_########
Default password: fluidlab
IP address: 192.168.#.#
5. Hotspot mode has been successfully enabled if the hotspot icon ( )
appears on the menu bar.
You can now access the WLAN hotspot that has just been created with other WLAN-
enabled devices (PC, laptop) using the data shown above.
Note: The necessary steps for connecting a PC or laptop to the fluidlab R-300's WLAN
hotspot may be found in the manual for the product in question (keyword
“Connecting to WLAN networks”).