Antunes JS-1000, Международное руководство пользователя

Страница: 8 / 18

P/N 1011512 Rev A 10/18 8
Working with Menu Items
Follow these steps to create new menu
items, edit existing menu items, delete
menu items, or copy menu items.
From the
Heating
or
Ready
screen, press
the Tools icon .
This opens the Tools screen shown below:
To work with menu items, press the Menu
icon . This opens the Select Function
screen shown below.
From the Select Function screen (above),
press the appropriate icon to edit, add,
delete, or copy a menu item. You can also
press the Factory Reset icon to restore the
factory settings or press the Cancel icon to
return to the Tools screen.
Editing a Menu Item
If you press the Edit Menu Item icon, the
system displays a list of the existing menu
items starting with the first three.
If the food item you want to edit is already
shown on the display, you can simply
press it.
After you touch the item you wish to edit,
the system displays the name of the item
and an on-screen keyboard you can use
to rename the item. Edit the item name as
desired or leave it as it is.
Press the
RETURN button on the key-
board. The name is saved and the system
then displays the New Item screen (below)
with the available settings for the edited
menu item.
Press the radio button next to the value
you wish to change. Then use the Up and
Down arrow icons on the display ( or
) to increase or decrease that value.
Be sure to change all values as required
before proceeding. When you are finished
making changes, press the Save icon
to save the settings.
NOTICE: The radio button next to each
setting must be pressed before
it can be adjusted.
The available settings you can change are:
y
Cycle Time - The length of
time in minutes and seconds
for the full cooking cycle.
y
Shot Length - The length of
time the water valve opens to
spray water onto the steaming
generator. The longer the shot
length, the more water is sprayed
onto the steam generator.
y
Shot Rate
- The time between
each shot of water onto
the steam generator.
y
Shot Count
- This value is
automatically calculated by the
system using the Cycle Time
and Shot Rate values. This is the
number of total shots of water that
will occur during the cook cycle for
that menu item. The shot count can
only be changed by adjusting the
Cycle Time or Shot Rate values.
You can also press the
Cancel
icon to
cancel the edit and return to the Select
Function screen.
EDIT
MENU
ITEM
ADD
MENU
ITEM
CANCEL COPY
MENU
ITEM
FACTORY
RESET
DELETE
MENU
ITEM
Creating New Menu Items
Creating new menu items follows the same
procedure as editing an existing menu
item. The only difference is that you press
the Add Menu Item icon from the
Select Function screen . Then you are
asked to enter a name for the new menu
item. Do so and press the RETURN button
on the on-screen keyboard.
The system then displays the
New Item
screen where you can set the Cycle Time,
Shot Length, and Shot Rate just as you
would when editing a menu item.
Copying a Menu Item
To copy a menu item, press the Copy
Menu Item icon from the Select
Function screen. The system displays a
list of the existing menu items starting with
the first three.
Use the Up and Down arrow icons on the
display ( or ) to page up or down to
the appropriate choice and then press the
name of that choice. The menu item is
copied and added to the end of the menu
item list.
You can then edit the name of the copied
item and edit the settings according to
the Editing a Menu Item section of this
manual.
The new menu item will be put in alpha-
betical order upon unit restart.
Deleting a Menu Item
To delete a menu item, press the Delete
icon from the Select Function screen.
The system shows the list of existing menu
items in alphabetical order.
NOTICE: Be sure you want to delete the
menu item before proceeding!
Use the Up and Down arrow icons on the
display ( or ) to page up or down to
the appropriate choice and then press the
name of that choice. The menu item is
deleted.