Antunes 9210850, Руководство по эксплуатации

Страница: 14 / 24

HCT-5H BUN TOASTER
14
P/N 1011256 Rev. I 3/18
McDonald’s
TROUBLESHOOTING (continued)
Problem Possible Cause(s) Corrective Action
No Display Power Cord is not plugged into the outlet Unplug the power cord then firmly plug back in
No power at outlet
Contact your electrician
Circuit Breaker is Tripped or OFF Reset circuit breaker
Equipment malfunction Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.
The buns must be
forced into the toaster.
Sticking and Burning
The upper &/or lower black belts are
worn & need replacement
Replace all belts every 3 months as per PM
The rear top &/or bottom spring loaded
rollers are in the unlocked state.
Verify the roller is properly seated & extended
towards the rear to apply tension to the belt.
Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.
The black belts are worn due to not
being properly cleaned daily or over 3
months old.
Follow the daily PM for the belts
Improper compression setting Use recommended compression #4. Contact
Antunes Technical Support at +1-877-392-7854
(toll free) for assistance.
Mechanical problem within conveyor
system
Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.
Buns are toasting too
light
Incorrect temperature set-points Perform a factory reset as detailed in
“Programming Section” of this owner’s manual.
Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.
Incorrect motor speed Perform a factory reset as detailed in
“Programming Section” of this owner’s manual.
Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.
Improper compression setting Use recommended compression #4. Contact
Antunes Technical Support at +1-877-392-7854
(toll free) for assistance.
The black belts are worn due to not
being properly cleaned daily or are over
3 months old.
Follow the daily maintenance & quarterly belt
replacement as detailed in the PM
Light/Dark settings must be adjusted Adjust the Light/Dark settings to achieve a
darker product. Contact Antunes Technical
Support at +1-877-392-7854 (toll free) for
assistance.
Using refrigerated buns Verify that only room temperature buns are
being used
The platen heater surface has carbon
buildup
Clean any platen heater surface buildup.
Contact Antunes Technical Support at +1-877-
392-7854 (toll free) for assistance.