Antrica ANT-3300, Руководство пользователя

Страница: 16 / 57

ANT-3300 User Manual
-15-
2. Remote Video Monitoring
There are two ways to view the remote video when the connections are completed between a site and
central system. In order for proper operation, an IP address must be set accordingly. Please refer to
True Manager or Remote Setting in Chapter 4 and 5 for further details.
! Video Monitoring with Decoder System
Once the encoder IP address is set in the remote IP address section of the decoder, the decoder
system will connect to the encoder system and start receiving the video images. Normally, a monitor
connected to the decoder will display video images.
! Video Monitoring using Internet Explorer
If ANT-3300’s IP address in entered in Internet Explorer, the system will ask for confirmation to install
Active-X control. Once authorized, Internet Explorer will start to display video images from the
encoder as shown below.
! Video Selection
If Primary is selected, Max. 720 x 480 (NTSC) or 704 x 756 (PAL) via H.264 compression
algorithm video can be displayed. And once activated Dual Video compression and a
Secondary video stream may be selected, H.264 or MJPEG compression algorithm video can
http://192.168.10.100 USER :admin PASSWORD: 1234