Antrica ANT-3300, Руководство пользователя

Страница: 34 / 57

ANT-3300 User Manual
-33-
The event configuration configures the actions for each event type. Local section configures the
actions for events from local (self) system and configuration activates local devices and Remote
sections configures the actions for events from remote (peer) systems.
The following table lists the possible actions for events.
Action Description
Beep
Outputs beep sound using the buzzer in the
system
Alarm1/Alarm2 Triggers alarm (relay) port.
E-mail
Sends E-mail to the specified address. AVI file
can be attached
FTP Upload AVI file to a specified FTP server
Preset Moves the PTZ to associated preset position
!
Sensor1 / Sensor2
Configure the actions when the sensor 1 or 2 is activated. Multiple actions can be set for a
single event.
! On Video Loss
Configure the actions when video input signal is lost. Multiple actions can be set for a single
event.
! On Motion
Configure the actions when motion is detected. Multiple actions can be set for a single event.
! On Disconnect
Configure the actions when the link (connection) with peer system is disconnected. Multiple
actions can be set for a single event.
!
Alarm and Beep activation duration
Set the duration of alarm or beep activation in case of an event. If it is set to continuous, it will
be in an active state until an operator resets it manually.
! E-mail Notification
Specify the information to send an E-mail as the action of an event. The address of mail
(SMTP) server needs to be specified on Server Address field, and Port specifies the port
for SMTP operation (Port 25 is the default port in SMTP operation. If a different port is
configured in the SMTP server, this port needs to be changed accordingly). When the server