Antrica ANT-3300, Руководство пользователя

Страница: 19 / 57

ANT-3300 User Manual
-18-
4. Remote Configuration
1. Remote Configuration
The server can be configured using a web browser. Type the IP address of the ANT-3300 in the
address input area of Internet Explorer, then a live view screen will be displayed. Press Setup button
located in the upper right area of the monitoring screen, then the setup page for server setup will be
displayed.
The remote configuration window may be slightly different depending on the system modes (Encoder,
Decoder). The general explanation of the configuration in this manual is based on an Encoder system
and differences according to the modes will be clarified when needed.
The configurations are grouped into 8 categories: System , Video , Audio , Network , Serial , Event,
Preset and User . Any configuration changes are not applied until Apply is pressed. Leaving the page
without pressing Apply button, changes in the page will be discarded.
2. Encoder Configuration
While most configuration items are common for Encoder, Decoder and Duplex mode, there are items
which are relevant to specific system modes. All the configuration items for Encoder mode are
explained first. Then, items specific only to Decoder and Duplex mode are described later. Sections
for Decoder and Duplex will not include items common for all modes.
) Enter IP Address
* Press Setup button