manualshive.com logo in svg

ANTONUS STEP BROTHER, Руководство пользователя

Поделиться
Скачать
ANTONUS STEP BROTHER Скачать руководство пользователя страница 7

6

But the 

Step Brother is not simply an ARP Sequencer re-

plica and no more. The idea of   the 

Step Brother was also de-

veloped from a deep admiration for the design of the classic 
ARP model 2600 synthesizer. Despite the enormous benefits 
that have made the 2600 a mythical instrument is remarka-
ble that a considerable number of users agree that there 
are only a couple or three of elements that in case of being 
implemented in the original design they can exponentially 
raised the already huge sound palette of the instrument. 
Combining the 2600 with the ARP Sequencer allowed to take 
advantage of much of the potential of both instruments, but 
as it was mentioned it was common to miss a couple of extra 
functions for advanced programming. Also visually the 2600 
had a different design and intention than the Arp Sequencer. 
The 2600 had a design based on a Tolex transport case with a 
strong sound laboratory idea and transportable synthesizer. 
The ARP Sequencer, on the other hand, had a look with woo-
den sides and absence of carry options (neither protective 
cover, nor grabs) as well as differences in proportions of the 
size and shape of one instrument to other. It was remarkable 

not only aesthetics differences, but also “places” where to 
use it. It does not mean that the ARP Sequencer could not be 
taken from one place to another, but the 2600 design being 
somewhat larger is much friendly for “on the road” perfor-
mance and the aesthetics in the style of the amplifier guitar 
combo is more “Rock And Roll”.

After lot of time using these two instruments we were 

a large number of users who dreamed of filing and polis-
hing those details to be able to approach it to an ideal and 
that way I started to develop the piece that would fit the 
2600 both in function and aesthetics and even adding MIDI 
communication. And is not only made to complete the mo-
del 2600 even can interact perfectly with the classic and 
modern modular systems all without sacrificing features of 
the ARP Sequencer as is the clarity, comfort and ability of 
inspiration that has its interface. All presented in a cabinet 
style 2600, with lid and grip prepared for continuous tra-
vels to play on stage.

Later will detail the elements that surround the sequen-

cer, which were conceived in such a way that their contri-

Arp sequencer 1601 with ARP Odyssey MK2 color scheme

Arp sequencer 1621 with ARP Odyssey MK3 color scheme

Содержание STEP BROTHER












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды