manualshive.com logo in svg

ANTONUS STEP BROTHER, Руководство пользователя

Поделиться
Скачать
ANTONUS STEP BROTHER Скачать руководство пользователя страница 16

15

V.1. THE SEQUENCER

A sequencer conceptually is simply a control device. Like 

other control devices (LFO’s, pedals, etc.), the sequencer 
can not produce sound by itself, it must be connected to a 
synthesizer (at least in theory, with the 

Step Brother we will 

see that we can go beyond that concept).

When the sequencer has been properly connected to a 

synthesizer, can be used to replace the keyboard. While the 
sequencer has literally hundreds of musical applications, 
its primary use is to create “sequences” of predetermined 
pitches. The way he creates sequences of pitches is creating 
sequences of control voltages, which in turn control the VCO 
oscillators in a synthesizer.

The 

Step Brother Sequencer is essentially a 16-step auto-

matic stepping switch. For each step, the sequencer can pro-
duce a control voltage that can be adjusted with one of the 
16 sliders. Therefore, a series of 16 tones can be programmed.

Various gate signals, used to trigger the envelope genera-

tor in your synthesizer, are also available from the sequen-
cer. The sequencer contains its own VCO which is used to 
determine the stepping speed of the sequencer. The speed of 
this VCO will determine how fast the sequence of notes you 
have set up will be played back.

Before you hook your sequencer up to your ARP synthesi-

zer, it will help to try a few silent experiments and familia-

rize yourself with several of the sequencer’s features. Plug 
in your sequencer and turn on the power switch. The red 
pilot light on the switch should go on and other panel lights 
may go on also. Set the controls on the front panel exactly as 
shown in Diagram 1 (look at page 16).

Find the area of the front panel that has the three slide 

controls and push button (A) for the Clock Oscillator. Push 
the Clock Start/Stop button (A) and notice that you can start 
and stop the sequencing. With the clock running, move the 
CLOCK FREQ control (B) up and down and observe that the 
stepping speed changes with the position of the slider. 

Stop the clock again by pressing the CLOCK START/STOP 

button (A), and observe which of the 16 position lights is 
on. Now press the RESET button (C) and note that the se-
quencer jumps to position 1. Press the STEP button (D) a 
few times and the sequencer will advance one stop each 
time. Experiment with the STEP, RESET, and CLOCK START/
STOP push buttons until you thoroughly understand their 
operation.

Next, locate the SKIP/OFF/RESET slide switch (E). Move 

this switch to the skip position and start the clock. Now 
move the first GATE ASSIGN (F) switch from the center po-
sition to the bottom position. Notice that the sequence now 
skips position 1 and goes directly from position 16 to posi-
tion 2. Move the GATE ASSIGN switch 2 down also, and the 
sequencer will skip both the first and second positions. Try 

V. 

Step Brother 

sections, 

 

descriptions and uses

Содержание STEP BROTHER












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды