23
www.antiktech.com
Gigabit Input
Under full-duplex operation mode, the device supports single uni/multicast reception. Set the uni/multicast
target IP address and port number in the page.
Uni/Multicast IP Address:
set the multicast address for the incoming IP streaming. To receive a unicast
streaming, the submenu can be ignored.
Uni/Multicast UDP Port:
set the port number for the incoming IP streaming.
TS Clock Recover:
Auto:
it is suggested to set Auto when there is accurate PCR carried by the inputted TS/IP
Fixed Rate:
when fixed rate is selected, user has to configure a bit rate to regenerate the TS clock. The
configured fixed bit rate has to be a higher than the bit rate of the inputted TS/IP.
Gigabit Output
Under full-duplex operation mode, the device supports single uni/multicast output. The default source for
TS/IP output is the built-in remux.
(Note: the page below is displayed only when the TS/IP operation mode is Full-duplex mode. To change the
TS/IP operation mode, please refer to
chapter 8.5 System-Device
.)