18
www.antiktech.com
System
Gigabit Mode
Gigabit Mode:
Gigabit Mode: Multiple
Output
Multiple Output:
the IP I/O is configured as multiple
uni/multicast output mode, which delivers up to 10
streams over IP. There are 8 stuffed or un-stuffed
SPTS (lower bit rate but less PCR accurate than
normal SPTS, from local encoders) and two MPTS
from built-in remultiplexer and ASI input over the IP
with different Unicast or Multicast IP addresses.
Full Duplex:
the IP I/O is configured as full duplex
mode, which allows only one MPTS or SPTS over IP
input and output in uni/multicast at the same time.
8. Control with Web Server
EX-5108 has an integrated web server. This web server allows the configuration and status requests with a
standard web browser. To operate a
EX-5108, first make sure the Ethernet control port is well connected in
the network and could be pinged by the host PC, and then enter the IP address of the
EX-5108 into the
browser, there will be a pop-up showed asking for login user and password. After login the device can be
operated. The default user name and password are respectively
“root” and “12345”. The username and
password can be changed by user via front panel or via submenu under the system page. If the username and
password are forgotten, user have to set a new one via front panel.
8.1 Status
Via the status page, user can have an overview of the current status of the connected
EX-5108.