14
www.antiktech.com
Enable:
rescale the video resolution of the output
manually
Scale Vertical:
set the resolution in vertical
576
Scale Horizontal:
set the resolution in horizon
720
Null Filter:
On:
filter away the null packages
Off:
the service is stuffed with null packages
Note Null packet is essential for DVB applications,
don't remove them.
Null Filter: On
Encode Start out
Encode Start :
Enter=Yes:
the settings will be applied to the selected
encoder, and start it to encode.
Exit=No:
cancel the settings to the selected encoder,
which will keep the previous status
Remux
Remux
Program List
Program List:
select the programs to remux. Click on
Enter to select, double click to cancel. (The
program(s) will be marked with an asterisk (*) once be
selected)
Encoder 1:
select the SPTS from encoder 1
Encoder 2:
select the SPTS from encoder 2
Encoder 3:
select the SPTS from encoder 3
Encoder 4:
select the SPTS from encoder 4
Encoder 5:
select the SPTS from encoder 5
Encoder 6:
select the SPTS from encoder 6
Encoder 7:
select the SPTS from encoder 7
Encoder 8:
select the SPTS from encoder 8
ASI Input:
select the program(s) inputted via ASI
input port.
IP Input:
select the program(s) inputted via IP input
port. (Note: this sub-menu is displayed only when the
IP I/O is configured as full-duplex mode.)
Bit Rate
Output Bit Rate:
key in the bit rate of the newly
generated MPTS, valid range from 100~216000 Kb/s
Output Bit Rate:
38015Kb/s
Packet Size
188 Byte / 204 Byte
188 Byte
TS ID
TS ID:
key in the TSID of the newly generated MPTS,
valid range from 0 to 65535 decimal
TS ID:00008
Remove CA
ON:
remove the CA descriptors that are carried within
the inputted TS over ASI or IP
OFF:
keep the CA descriptors
OFF