15
www.antiktech.com
Insert EIT
ON:
insert EIT into the output stream, EIT data may
come from ASI or IP input port
OFF:
don’t insert EIT into the output stream.
OFF
Output Program
Display the program list of the remux
TS/IP(Gigabit
Mode: Multiple
Output)
Channel 1~8
(
the streaming
comes from Encoder
1~8
correspondingly.
)
Uni/Multi IP Address:
set the uni/multicast IP
address for the IP output 1~8
Uni/Multi UDP Port:
set the port number, valid range
from 1~65535
Target MAC Address:
set the destination port number MAC Address
Gigabit Out Switch: ON/OFF:
to switch on/off the
current channel
Uni/Multi IP Address:
238.069.070.001
Uni/Multi UDP Port:
01234
Target MAC Address:
00:00:24:56:12:67
Gigabit Out Switch: ON
Channel 9
(
the streaming
comes from the
built-in Remux or
ASI input.
)
Uni/Multi IP Address:
set the uni/multicast IP
address for the IP output channel 9
Uni/Multi UDP Port:
set the port number, valid range
from 1~65535
Target MAC Address:
set the destination port number MAC Address
Gigabit Out Switch: ON/OFF:
to switch on/off the
current channel
MUX/ASI Out: set the source for IP output channel
9
Uni/Multi IP Address:
238.069.070.001
Uni/Multi UDP Port:
01234
Target MAC Address:
00:00:24:56:12:67
Gigabit Out Switch: ON
MUX/ASI Out: ASI
Gigabit Local
Gigabit Address:
set the IP address of the IP port
IP Board IP
Address:10.10.80.60
Gigabit Subnet Mask:
set the net mask of the IP port
IP Board Net
Mask:255.255.255.0
Gigabit Gateway:
set the gateway of the IP port
IP Board
Gateway:10.10.80.1
Gigabit MAC Address:
display the MAC address of
the IP port
IP Board MAC Address:
Protocol:
UDP:
set UDP protocol to IP output
RTP:
set RTP protocol to IP output
Protocol: UDP
TS Pkts Per UDP:
set the number of TS packets that
can be carried by each UDP packet, valid range from
1~7
TS Pkts Per UDP: 7
Time To Live
: set TTL to the output IP packets, valid
range from 1~255
Time To Live: 255
Type Of Service:
Min Delay/Max Reliability/Max
Throughput/Min Monetary Cost/Normal
Type Of Service: Min
Delay