Anthony Liftgates ALB-1500, Инструкция по установке, эксплуатации и ремонту

Страница: 12 / 52

Anthony Lifgtates, Inc.
12
L-501 Models
www.anthonyliftgates.com 800-482-0003
5. Installation Section
5.1 Unpacking
Make sure the complete package is received. The liftgate
is packaged on one pallet.
1. Pre-assembled Liftgate. 2. Power cable with fuse.
3. Loose parts
Check that the following parts are included
Item Part Number Description Qty.
1 A-150218 Reinforcement Plate 2
2 A-150127-R Lower Support Bracket - RH 1
3 A-150127-L Lower Support Bracket - LH 1
4 A-135296 Mounting Strap - RH 1
5 A-135297 Mounting Strap - LH 1
6 A-135089-R Mounting Strap - Short - RH 1
7 A-135089-L Mounting Strap - Short - LH 1
8 A-135116 License Plate Holder 1
9 A-150095 Cable Ties 20
Item Part Number Description Qty.
10
A-135087 Strap Washer 2
A-132085 1/2-13 x 1” Hex Head Cap Screw 10
A-150065 1/2” Flat Washer 10
A-150074 1/2” Lock Washer 10
ATU159 3/8-16 x 1” Carriage Bolt 5
2054 3/8” Lock Washer 17
P162 3/8” Hex Nut 17
A-133073 Ground Cable 1
A-133008 3/8” Cable Lug 1
A-133007 1/4” Cable Lug 2
ATU247 3/8-16 x 1-1/4” Hex Head Cap
Screw 6
2058 3/8” Flat Washer 17
A-150091 Light Kit 1
A-132072 #8 x 1-1/2” Stainless Stl Self
Drilling Screw 4
A-135165 Lens Mounting Bracket 2
5434 5/16-18 x 3/4” Bolt 2
2019 3/8-16 x 1-3/4” Hex Head Cap
Screw 6
5.2 Tools Required
The following is a list of suggested tools that should be
used to install the liftgate.
• Overhead crane or forklift
• Lifting chain with S hooks, minimum 1000 lb. capacity
• Pipe clamps or ratchet straps
• Tape measure
• Screwdriver
• Level (small, magnetic)
• Drill
• Cable crimping tool
• Wrenches