manualshive.com logo in svg

Anthology CS1504 Series, Быстрый старт

Поделиться
Скачать
Anthology CS1504 Series Скачать руководство пользователя страница 2

800 Cottageview Dr.  Suite 211  Traverse City, MI 49684    Toll Free: 800-819-0095     Fax: 231-933-0091  [email protected] 
Last Updated 01/02/09 EHS 

The CS1504 scanner comes with a standard Serial connection cable that connects between the computer 
and the scanner (mini connector).  Additionally a USB to Serial adaptor is available.  Anthology has 
decided to support the USB to Serial (with adaptor) combination only.   
 

1.  If you have a Palm device docking unit, a Pole Display, or any other serial based device that is 

connected to COM1 already, shut down the machine, disconnect the device, then power the 
station back on.  This should allow the computer to recognize the device is no longer connected. 

2.  Verify the USB adaptor is firmly attached to the Serial connector.  The male and female serial 

connectors can be screwed together for stability. 

3.  Plug the USB end into the computer and allow a few moments for the computer to recognize new 

hardware.  You may receive a message saying that “New Hardware” or “New USB Controller” 
was found.  Shortly after a new window should appear.  Follow the images below to set the 
correct options and install the necessary driver.     

 

 

#1-  Select “No, Not this time”, click Next          

 

#2-  Select “Install from a list or specific location” 

 

#3-  Select “Include this Location in the Search” 

#4-  Completion message upon 

Содержание CS1504 Series










Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды