Anthogyr Xpert Unit, Руководство пользователя

Страница: 11 / 12

For transmitters for which the rated maximum output power has not been given above, the recommended separation distance "d" in me-
tres (m) can be estimated by using the equation applicable to the transmitter frequency, where 'P' is the characteristic of maximum trans-
mission power of the transmitter in watts (W), according to the manufacturer.
NOTE 1 : U
T
is the AC voltage of the network before application of the test level.
NOTE 2 : At 80 MHz and at 800 MHz, the higher frequency range applies.
NOTE 3 : These directives may not apply in all situations. Electromagnetic propagation is affected by the absorption and the reflection by structures, objects
and persons.
a
The field intensities of fixed transmitters, such as the base stations for the radio phones (cellular / wireless) and land mobile radios, amateur radio, AM and
FM broadcasting and TV broadcasting, cannot be provided theoretically with accuracy. To evaluate the electromagnetic environment due to fixed RF transmit-
ters, it is advisable to consider an electromagnetic investigation on site. If intensity of the field, measured at the location where the XPERT UNIT
® motor is
used, exceeds the applicable RF compliance level as above, it is advisable to monitor the XPERT UNIT ® motor to verify that its operation is normal. If abnormal
performances are observed, then additional measures may be necessary, such as reorientation or relocation of the XPERT UNIT ® motor.
b
Over the frequency range from 150 kHz to 80 MHz, it is advisable that field strengths are less than 3 V/m.
Recommended separation distances between portable and mobile RF communication devices and the XPERT UNIT
®
motor
XPERT UNIT
®
motor is intended for use in the electromagnetic environment in which radiated RF disturbances are controlled. Customer or user
of the XPERT UNIT ® motor can contribute to prevent electromagnetic interferences by maintaining a minimum distance between the portable and
mobile RF communication devices (transmitters) and the XPERT UNIT
®
motor as recommended below, depending on the maximum transmission
power.
Separation distance depending on the transmitter frequency (m)
Rated maximum output power of
the transmitter in W
From 150kHz to 80MHz
d= 1.2 √ P
From 80MHz to 800MHz
d= 0.4 √ P
From 800MHz to 2.7GHz
d= 0.7 √ P
0.01 0.12 0.04 0.07
0.1 0.38 0.13 0.22
1 1.20 0.40 0.70
10 3.80 1.30 2.20
100 12.00 4.00 7.00
19. ACCESSOIRIES
Reference Description
XP411 Motor support
XP412 Clips for hanging of the irrigation line (x 10)
XP311L LED Micromotor
XP311 Non-LED Micromotor
XP312 Micromotor cable
XP313 Micromotor
XP UNIT
non LED + cable
XP313L Micromotor
XP UNIT
LED + cable
XP216
AC/DC charging adapter 8W-5V
(INPUT :100-240VAC;0.4A;50-60Hz / OUTPUT : 5.0VDC;1.6A)
XP415 Bracket
110535 Screen protection film (x 5)
1105310 Screen protection film (x 10)
110545 Micromotor protection casing (x 5)
1105410 Micromotor protection casing (x 10)
110525 Irrigation lines for bag or bottle (x 5)
1105210 Irrigation lines for bag or bottle (x 10)
6841-0.5L 0.9% NaCl bag / 0.5 litre
6841-0.5L_V 0.9% NaCl bag / 0.5 litre (x20)
16400XL Implantology contra-angle light XS
16400X Implantology contra-angle XS
a
®
-
EN - USER GUIDE
Fr
an
çais
Engli
sh
D
eu
tsc
h
Esp
añ
ol
Ita
li
an
o
Portu
gu
ês
Ne
d
erl
an
d
s
中国的
رع