•
Do not use harsh chemicals to clean your unit. Clean only with specialized cleaners for
electronics equipment.
•
Connect all your devices before powering your unit.
•
This unit is connected via its power cord to the mains safety earth.
•
Never operate the unit without this earth connection.
•
DC power supply cable should be routed so that it is not likely to be walked on or squeezed by
items placed upon or against it.
•
To completely turn off the device, unplug the power cable first from the outlet and then from
the rear panel of the unit.
•
Both occasional and continued exposure to high sound pressure levels can cause permanent ear
damage via headphones and monitors.
•
Your unit should always be unracked when traveling or in a flight case.
•
The device is designed to operate in a temperate environment, with a correct Operating
Temperature of 0-50° C, 32-122° F.
2. Quick Start
Once the Goliath HD | Gen. 3 has been connected to an AC power source:
1. Connect the HDX, USB 3.0 or Thunderbolt™ cable to the corresponding ports on your device and
computer.
Note: The HDX ports are disabled by default and can be enabled with an upgrade. Visit the Goliath HD
| Gen. 3 product page to learn more.
2. Download and install the Antelope Audio Launcher and Unified Driver from the Downloads
section on the Goliath HD | Gen. 3 website.
3. Start the Antelope Audio Launcher. The application will automatically update itself and proceed to
download and install the Goliath HD | Gen. 3 software Control Panel.
4. Open the Control Panel from inside the Launcher and follow the device activation procedure.
5. Connect your analog and digital gear of choice to Goliath HD | Gen. 3.
6. Open your preferred DAW and ensure the device is selected as your main input and output device.
Note: Make sure your Goliath HD | Gen. 3 has the most recent firmware installed. The Antelope
Launcher will inform you if a newer version is available
