5. HDX 2 Channels
Shows whether the audio channel is active (green) or not (red).
6. Loop Sync In
Lets you choose the Loop Sync source (internal clock, Word Clock input, etc.)
7. Loop Sync Enable / Master Indicators
Turns Loop Sync On or Off with Goliath HD | Gen 3 as the master Loop Sync source.
8. Loop Sync Out
Lets you route Loop Sync signal to the Goliath HD | Gen 3 outputs (Word Clock outs, for example).
6.7 Trim Tab
The Trim Tab lets you adjust Monitor Trim levels and apply individual or multiple Line In / Line Out
signal trims.
1. Monitor Trim
Choose a setting for the Monitor output signal trim.
2. Line In Trim
The knobs and indicators let you adjust input signal trim for each individual audio channel.
3. Line Out Trims
The knobs and indicators let you adjust output signal trim for each individual audio channel.
