Goliath HD | Gen. 3
User Manual
Contents
1. Safety Notes
2. Quick Start
3. Front Panel Explained
4. Rear Panel Explained
5. Touchscreen Explained
6. Software Control Panel
6.1 Main View and Routing Tab
6.2. Mixer Tab
6.3 AuraVerb
6.4 Effects Tab
6.5 Meters Tab
6.6 HDX Settings Tab
6.7 Trim Tab
6.8 Settings Tab
7. Troubleshooting
1. Safety Notes
To reduce the risk of electrical shocks, fire, and related hazards:
•
Do not remove screws, cover, or cabinet. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
•
Do not expose this device to rain, moisture or spillover of liquid of any kind.
•
Should any form of liquid or a foreign object enter the device, do not use it. Switch off the
device and then unplug it from the power source. Do not operate the device again until the
foreign object is removed or the liquid has completely dried and its residues fully cleaned up. If
in doubt, please consult the manufacturer.
•
Do not handle the power cables with wet hands!
•
Make sure the device is switched off when plugging/unplugging it to/from the power source.
•
Avoid placing things on the cabinet or using the device in a narrow and poorly ventilated place
which could affect its operation or the operation of other closely located components.
•
If anything goes wrong, turn off the device first and then unplug the power. Do not attempt to
repair the device yourself. Consult authorized service personnel or your dealer instead.
•
Do not install near any heat sources such as radiators, stoves, or other apparatus (including
amplifiers) that produce heat.
