Antriebstechnik GmbH
Technical Documentation EC863 and ECE3AP-00-01
Page 3 of 18
(02/99) R0047GB.DOC
1.
Safety Tips
Electrical devices present a danger source.
In using in systems and controls with safety-technical requirements
and during installation, all appropriate laws
and regulations are to be observed.
The valid accident-prevention regulations are to be absolutely
observed during work on devices carrying electrical loads.
Repairs on the device or its components are only to be conducted
by the manufacturer for reasons of safety and the upkeep of
documented system data and functions.
No liability will be assumed for an unsuitable, incorrect manual or
automatic setting of the drive parameters.
Improper use can lead to personal injury and material damage.
The device operating manual must be carefully read before
installation by expert personal who are familiar with the electrical
drive equipment.
Before touching electrical contacts, be certain that the voltage
between them is less than 60 V.
The user is to ascertain, through independent monitoring units, that
in case of any fault in the drive unit, the drive unit is safely brought
to stop.
The user is responsible for the set-up an connection of the motor,
the converter an accessory devices in accordance with the
recognised technical regulations in the country of set-up
as well as any valid regional regulations. Here, the cable
dimensioning, shielding, grounding, switch off, separation,
and the overload protection are especially to be taken into
consideration.
The provisions according to DIN 57100, EN 60204 part 1 are valid.