HYDRAULIC CALLIPER TYPE NHCD-1400
Instructions for assembly, adjustment and maintenance
T.D.S.: BC.TDS.00025I
Rev.0.: September - 2012
5.
CHANGING THE LININGS.
The linings (marked 10), are comprised of a steel plate and the friction material.
Its total thickness is of 30 mm per lining.
When the total thickness of the lining has dropped to 22 mm at any point, in other
words, it has worn down by 8 mm, it must be replaced.
NOTE
ANTEC recommends always replacing both brake linings
regardless of whether one or both linings have worn down.
The customer must do the
brake’s electrical connection
with the customer’s electrical
equipment.
