56
change and the Adjust Vibrato function will
scale the vibrato while leaving the intended
pitch changes alone. But again, depending
on the actual performance, sometimes this
will work better than others. If Adjust Vibrato
seems to be making changes to parts of the
audio you’d like to leave alone, simply Undo
the adjustment and use the I-Beam to select
only the vibrato portions you wish to edit.
The Clear All Button
Clicking the Clear All button erases all tracking
and correction information, whether or not it is
currently visible on the Pitch Display. Since you
can not undo this function (and accidentally
executing it could be catastrophic), you must
confirm your intent in a warning dialog.
The Snap To Note Button
Press this button to enable Snap To Note
mode when using the Line Tool. In Snap
To Note mode, each line segment will
automatically snap to the nearest semitone.
Pressing the Shift key on your keyboard while
drawing a line temporarily toggles the state of
the Snap To Line button. I.e., if Snap To Note
mode is not enabled, pressing Shift will enable
it for as long as Shift is pressed. Conversely, if
Snap To Note mode is enabled, pressing Shift
will disable it for as long as Shift is pressed.
Have fun!
Содержание Auto-Tune 5
