ANTAIRA LNX-2012GN-SFP Скачать руководство пользователя страница 49

Страница: 49 / 105

Antaira Technologies - Industrial Ethernet Switches

LNX-2012G-SFP Series User Manual V1.0

5.6.2.1 Private VLAN

The Private VLAN membership configurations for the switch can be monitored and modified

here. Private VLANs can be added or deleted here. Port members of each Private VLAN can

be added or removed here. Private VLANs are based on the source port mask, and there are

no connections to VLANs. This means that VLAN IDs and Private VLAN IDs can be identical.

A port must be a member of both a VLAN and a Private VLAN to be able to forward packets.

By default, all ports are VLAN unaware and members of VLAN 1 and Private VLAN 1.

A VLAN unaware port can only be a member of one VLAN, but it can be a member of multiple

Private VLANs.

Label

Description

Delete

Check to delete the entry. It will be deleted during the next

save.

Private VLAN ID

Indicates the ID of this particular private VLAN.

MAC Address

The MAC address for the entry.

Port Members

A row of check boxes for each port is displayed for each

private VLAN ID. To include a port in a Private VLAN, check

the box. To remove or exclude the port from the Private

VLAN, make sure the box is unchecked. By default, no

ports are members, and all boxes are unchecked.

Adding a New

Static Entry

Click

to add a new

private VLAN ID. An empty row is added to the table, and

the private VLAN can be configured as needed. The

allowed range for a private VLAN ID is the same as the

switch port number range. Any values outside this range

are not accepted, and a warning message appears. Click

"OK" to discard the incorrect entry, or click "Cancel" to

return to the editing and make a correction.

The Private VLAN is enabled when you click "Save".

The

button can be used to undo the addition of

new Private VLANs.

Содержание LNX-2012GN-SFP










































































































Результаты поиска

Содержание LNX-2012GN-SFP

Отзывы:

Бренды по названию

Популярные бренды

ANTAIRA LNX-2012GN-SFP, Руководство пользователя

Результаты поиска

Содержание LNX-2012GN-SFP

Отзывы:

Бренды по названию

Популярные бренды