ANTAIRA LNX-2012GN-SFP Скачать руководство пользователя страница 45

Страница: 45 / 105

Antaira Technologies - Industrial Ethernet Switches

LNX-2012G-SFP Series User Manual V1.0

Ingress Filtering

Enable ingress filtering on a port by checking the box. This

parameter affects VLAN ingress processing. If ingress

filtering is enabled and the ingress port is not a member of

the classified VLAN of the frame, the frame is discarded. By

default, ingress filtering is disabled (no checkmark).

Frame Type

Determines whether the port accepts all frames or only

tagged/untagged frames. This parameter affects VLAN

ingress processing. If the port only accepts tagged frames,

untagged frames received on the port are discarded. By

default, the field is set to All.

Port VLAN

Mode

Configures the Port VLAN Mode. The allowed values are

None or Specific. This parameter affects VLAN ingress and

egress processing.

If None is selected, a VLAN tag with the classified VLAN ID

is inserted in frames transmitted on the port. This mode is

normally used for ports connected to VLAN aware switches.

Tx tag should be set to Untag_pvid when this mode is used.

If a specific default value is selected, a Port VLAN ID can

be configured (see below). Untagged frames received on

the port are classified to the Port VLAN ID. If VLAN

awareness is disabled, all frames received on the port are

classified to the Port VLAN ID. If the classified VLAN ID of a

frame transmitted on the port is different from the Port

VLAN ID, a VLAN tag with the classified VLAN ID is

inserted in the frame.

Port VLAN ID

Configures the VLAN identifier for the port. The allowed

values are from 1 through 4095. The default value is 1.

*Note: The port must be a member of the same VLAN as

the Port VLAN ID.

Tx Tag

Determines egress tagging of a port. Untag_pvid - All

VLANs except the configured PVID will be tagged. Tag_all -

All VLANs are tagged. Untag_all - All VLANs are untagged.

Содержание LNX-2012GN-SFP










































































































Результаты поиска

Содержание LNX-2012GN-SFP

Отзывы:

Бренды по названию

Популярные бренды

ANTAIRA LNX-2012GN-SFP, Руководство пользователя

Результаты поиска

Содержание LNX-2012GN-SFP

Отзывы:

Бренды по названию

Популярные бренды